These crackmeters can be used in a wide variety of situations, especially where continuous or very frequent measurements are required, such as: monitoring of load tests on floors, monitoring of deformations of a structure under very rapid load variations, monitoring of cracks in a dynamic regime, application to rod and plate strain gauges, etc.
- Jointmeters and Crackmeters
Electrical Crackmeters with touching probe
Download Manual
Contact us for further information
Applications
These crackmeters find application in many situations, in particular in all cases where continuous data collection is needed such as monitoring:
- load tests on slabs
- structural deformation due to very rapid load changes
- cracks under dynamic conditions, etc.
- bridges
- tunnels
- landslides; earth or rock
- residential buildings
- rods
- monuments
- various
Features and Benefits
- High resolution and sensitivity
- High measurement speed
- Extremely robust
- Good resolution and linearity
- Simple and economical
- Simple measuring method
Measuring Principle
The potentiometric strain gauge/crackmeter is a simple linear or circular voltage divider, depending on the specific application. A resistive track is run by a slider which identifies the measuring points where the partition occurs. The cursor position locates the position of the measuring point. Properly powered the instrument releases an analog output signal proportional to the displacement.
The LVDT extensometer is made from a tube composed of three windings arranged with parallel axes, with inside a movable cylindrical ferromagnetic core, usually characterized by high magnetic permeability. The central winding is called primary and the other two secondary: the primary is connected to an AC voltage generator, while the heads of the secondary windings measure the output voltage which is proportional to the displacement.
| MODEL | LVDT Model | Linear Potentiometric |
| Sensor of temperature | No | No |
| Measuring Range | Da 0 ÷ 2 mm a 0 ÷ 600mm | ± 5 ÷ 150 mm |
| Linearity % | ± 0,3% F.S. ÷ 0,5% F.S. | From 0,5 a 0,05 FS, according to FS |
| Output | ±5V; 4-20 mA | Potentiometer; 4-20ma (upon request) |
| Supply Voltage | ± 9-36 Vdc | From 15 to 60 V, a seconda del F.S. |
| Anchoring type | Dowels, threaded bars, fixtures | Dowels, threaded bars, fixtures |
| Operation Temperature | -40 ÷ 85 °C | -20 ÷ 80 °C |
Accessories and related products
| Triaxial Deformometer | Allows the mounting of the 3 crackmeters for the monitoring of a crack into the three directions x,y,z, |
| Fixing Kit Axis Y | Allows the monitoring of the crackmeter for the control of the axis Y |
| Fixing Kit Axis Z | Allows the monitoring of the crackmeter for the control of the axis Z |
| Junction Boxes | Different Models for the connection to the different instruments |
| Multipolar cable | Different conductors for the connection of different sensors to one cable |
| DEC 5 | Portable Readout Unit |
| DEC 3000 | Portable Datalogger |
| CUM 3000 | Multichannel Datalogger |
| MUX | Multiplexer for the connection of different sensors to the Datalogger |
Technical Assistance
If you have any requests or questions about our instruments or if you have special needs that require different solutions from the standard, please contact us. Our team will provide all the necessary information and will be very happy to work with you to study, develop and customize instruments and solutions suitable for your specific needs.
All information in our datasheet is subject to change without prior notice.
Please check the datasheet/details carefully and contact Pizzi Instruments for further information.